Tecno Kb7- Dual - 16gb Rom - 1gb Ram - 6.2" - 3500mah - Black,Blue

• 6.2-inch IPS LCD capacitive touchscreen, 720 x 1520 pixels
• Android 8.1 Oreo Go Edition-1GB RAM Version
• Quad-Core 1.3GHz MediaTek MT6580 for the 1GB of RAM Version
• Mali 400/ IMG PowerVR GPU GPU
• 16GB built-in storage
• 13MP + 2MP rear camera and 8MP selfie camera
• 3,500mAh non-removable battery

Design And Display

TECNO Spark 3 has a massive 6.2-inch notched display. The notch on this device is a bathtub one taking almost all the top screen real estate. It also has quite a noticeable amount of chin down at the bottom. The body of the device is made with plastic but looks shiny in its wide array of colours

At the back of the device is a dual camera with an LED flash on the model with 2GB of RAM and a single rear camera also with an LED flash on the 1GB model. It also has a dual SIM slot and dedication MicroSD Slot for storage expansion.

TECNO Spark 3 Camera Review
The Spark 3 has a dual rear camera setup combination of a 13MP main shooter and a 2MPsecondary shooter. However, the model with the Go Edition of the Android operating system has only the main 13MP main shooter with no secondary camera at the back. Both models have a single 8MP front-facing camera.

Hardware and Software

TECNO Spark 3 has two models. One has a MediaTek MT6580 SoC with a Quad-Core Processor clocked at 1.3GHz with 1GB of RAM while the other has a beefier Mediatek MT6761 Helio A22 SoC which also a Quad-Core Processor 

Both models have 16GB of internal storage which is expandable via the onboard microSD card slot. The 1GB RAM model runs out of the box

Battery & Network Connectivity
The device is equipped with a 3,500mAh battery capacity on both models with no fast charging on both. There is also no word on 4G LTE on both models, probably reserved for the pro version. However, the usuals are present which includes 3G, 2G, Bluetooth, GPS, 3.5mm jack, WiFi, WiFi hotspot, WiFi direct and a microUSB port for charging and file transfer.