Product Description
The Sangoma A116DE PCIe, 16
spans, with H/W Echo Cancellation is part of Sangoma’s family of
Advanced Flexible Telecommunications hardware product line – using high
performance PCI Express interface,
providing superior performance in critical systems all over the world.
The Sangoma A116DE PCIe, 16 spans, with H/W Echo Cancellation supports up
to 32.8 Mbps of full duplex data throughout 480 voice calls using 16 T1/E1/J1 spans.
Sixteen
spans of T1, E1 or J1 available with
carrier-grade hardware echo
cancellation.
·
16 T1/E1 ports with PCI Express
interface
·
Support for Asterisk® and FreeSWITCH®
·
Lifetime warranty (with product registration)
Typical A116 Applications:
·
Call Centers
·
Value-Added Services
·
Large IVR Systems
·
Gateways and Soft Switches
With
Sangoma boards, you can take advantage of hardware and software improvements, as soon as they become
available. The Sangoma
A116, like all boards in Sangoma’s AFT family, is field-upgradable with crash-proof firmware.
Choose the
Sangoma A116E and A116DE, equipped with world class DSP hardware to achieve carrier-grade echo cancellation and voice quality enhancement
functions for telecommunication systems.
Also includes:
·
·
Technical Specifications
·
Sixteen T1/E1 ports with optimum PCI–Express
interface for high performance voice and data applications
·
Mix T1 channel banks and E1 networks with
full channel synchronization. TDM clocking mode lets network timing
to be passed from a network-connected DS0 to any or all of the other
ports so both T1 and E1 are supported simultaneously
·
Support for Asterisk® and FreeSwitch®
·
Fully compatible with all commercially available
motherboards—proper PCI-standard interrupt sharing without manual tuning
·
Dimensions: Full height by half length (107mm x 176mm)
·
Connector: Dense 68 pin SCSI type interface
·
Intelligent hardware: Downloadable FPGA programming
with multiple operating modes; add new features related to voice and/or data
when they become available
·
Line decoding: HDB3, AMI, B8ZS
·
Framing: CRC-4, Non
CRC4, ESF, SF, D4, J1 (Japan)
·
PCI Express Bus Version: 1.1
·
Maximum operational power: 5.5 W (1.67 A @ 3.3 V)
·
Temperature range: 0 – 50 °C
·
Ring buffer DMA handling for minimum host intervention and
guaranteed data integrity on high volume systems
·
Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN
PRI
·
T1/E1 and fractional T1/E1, multiple channel HDLC per
line for mixed data/TDM voice applications
·
Optimized per channel DMA streams and hardware-level HDLC
handling unload the host CPU
·
Uses raw bitstream interfaces to support arbitrary non-standard
line protocols, such as non-byte aligned monosynch or bisynch
·
WANPIPE® routing stack is completely independent
of TDM voice application for total system reliability
·
WANPIPE® supports certified, field-tested, and
reliable Frame Relay, PPP, HDLC, and X.25
Optional
DSP Hardware Echo Canceller Daughterboard
·
G.168–2002 echo cancellation in hardware
·
1024 taps/128 ms tail per channel on all channel densities
·
DTMF decoding and tone recognition
·
Voice quality enhancement: music protection, acoustic echo
control, and adaptive noise reduction
·
Does not increase the physical size of the card, and no
additional slot is required
Operating
Systems
·
Windows® 2003, Windows® XP, Windows® Server 2008,
Windows® Vista, Windows® 7
·
Linux (all versions, releases and distributions from 1.0 up)
T1/E1
Status Alarms
·
RED: Telco Red Alarm Condition
·
OOF: Out of Frame
·
LOS: Receive Loss of Signal
·
AIS: Alarm Indication Signal
·
RAI: Remote Alarm Indication (Yellow Alarm)
Line
Protocols
Voice
CAS, MFC/R2, PRI, ATM, Frame Relay, X.25,
HDLC, PPP, SS7, Transparent bit-stream, BSC
Higher
Level Protocols
IP/IPX
over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over
X.25, SNA over X.25, PPPoE,PPPoA, IP over ATM
Certification
(Pending)
·
FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A,
CIPSR 24, AFIC-2016, IEC 60950, JATE
Diagnostic
Tools
WANPIPEMON,
System Logs