Product Description
Power Saving
Back-UPS RS 1500, 230V | BR1500GI
Features
APC
Power-Saving Back-UPS Pro 1500, 230V
High
Performance Computer and Electronics UPS for Premium Power Protection
Includes
: CD with software , Qty 1- Detachable IEC Power Cord , Telephone Cable , USB
cable , User Manual , Warranty card
·
Adjustable voltage sensitivity
Provides
the ability to adapt the UPS for optimal performance in specific power
environments or generator applications.
·
Adjustable voltage-transfer points
Maximizes
useful battery life by widening the input voltage window or tightening the
output voltage regulation.
·
Audible alarms
Provides
notification of changing utility power and UPS power conditions
·
Automatic self-test
Periodic
battery self-test ensures early detection of a battery that needs to be
replaced.
·
Battery failure notification
Provides
early-warning fault analysis on batteries enabling timely preventive
maintenance
·
Battery replacement without tools
Enables
fast battery replacement, lowering Mean Time to Repair (MTTR).
·
Battery-protected and surge-only outlets
Reserves
power capacity and run time for connected equipment that require UPS battery
back-up while providing surge only protection for less critical equipment
·
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates
voltage fluctuations as a source of AV signal degradation and component
power-supply stress.
·
Building Wiring Fault Indicator
This LED
informs users of potentially dangerous wiring problems in the wall circuit.
·
Cold-start capable
Provides
temporary battery power when the utility power is out.
·
Dataline surge protection
Provides
protection of connected equipment from power surges on the data lines.
·
Disconnected battery notification
Warns
when a battery is not available to provide backup power.
·
Extendable Run Time
Additional
batteries can be added to provide power to the load for an extended period of
time in the event of utility supply failure.
·
Green mode
Patent-pending
operating mode that bypasses unused electrical components in good power
conditions to achieve very high operating efficiency without sacrificing any
protection.
·
Hot-swappable batteries
Ensures
clean, uninterrupted power to protected equipment while batteries are being
replaced
·
Intelligent battery management
Maximizes
battery performance, life, and reliability through intelligent, precision
charging.
·
LCD graphics display
Text and
mimic diagrams that display modes of operation, system parameters and alarms.
·
Power-saving outlets
Automatically
cuts power to idle equipment to conserve electricity.
·
Resettable circuit breaker
Easy
recovery from overloads; no need to replace a fuse.
·
Safety-agency approved
Ensures
the product has been tested and approved to work safely with the connected
service provider equipment and within the specified environment.
·
Serial connectivity
Use any
Home Automation network to monitor and control the S20 through its RS-232
serial port. For information on how to communicate with the S20, see APC's
Application Note #102. Crestron and AMX installers should visit their
respective websites for information on how to integrate the S20 into those
networks.
·
Telephone dataline surge protection
Provides
protection of connected equipment from power surges traveling on telephone
lines.
·
Transformer-block spaced outlets
Protect
equipment with input transformer blocks without blocking access to other receptacles.
·
USB connectivity
Provides
management of the UPS via a USB port (not available on all models).
·
User-replaceable batteries
Increases
availability by allowing a trained user to perform upgrades and replacements of
the batteries reducing Mean Time to Repair (MTTR)
Back-UPS
ProFeatures & Benefits
Marketing Features
·
Energy Management Function
Energy
saving feature automatically power off peripherals when the a master device,
usually a PC, hibernates or is shut down. Power to peripherals is immediately restored
when the master device wakes up or is switched on.
·
Green mode
Patent-pending
operating mode that bypasses unused electrical components in good power
conditions to achieve very high operating efficiency without sacrificing any
protection.
·
LCD Status Display
Provides
key UPS status at a glance. Multiple status indicators with load and battery
bar graphs.
·
Boost Automatic Voltage Regulation (AVR)
Preserves
battery life and maximizes runtime by correcting low voltages without
discharging the battery.
·
Battery-protected and surge-only outlets
Reserves
power capacity and run time for connected equipment that require UPS battery
back-up while providing surge only protection for less critical equipment
Protection
·
Battery and surge protected outlets
Back up
and protect your hardware and data during power outages, surges and spikes.
·
Dataline surge protection
Provides
protection of connected equipment from power surges on the data lines.
·
Surge only outlets
Protect
secondary electronics from surges and spikes without reducing battery power
used to run primary electronics during an outage.
Serviceability
·
Resettable circuit breaker
Easy
recovery from overloads; no need to replace a fuse.
·
Simple battery replacement
Increases
UPS availability by allowing quick, easy battery replacement.
Availability
·
Boost and Trim Automatic Voltage Regulation (AVR)
Gives
higher application availability by correcting low and high voltage conditions
without using the battery (not available on all models).
·
Green mode
Patent-pending
operating mode that bypasses unused electrical components in good power
conditions to achieve very high operating efficiency without sacrificing any
protection.
·
Customizable voltage-transfer points
Adjust
the voltage points (widen or tighten the range) where your UPS transfers to
battery to maximize useful battery life and protect sensitive electronics.
·
Customizable voltage sensitivity
Toggle
between pre-determined voltage-transfer points depending on your power quality
(high, medium or low sensitivity), maximizing useful battery life and
protecting sensitive electronics.
·
Automatic self-test
Periodic
battery self-test ensures early detection of a battery that needs to be
replaced.
·
Energy Management Function
Energy
saving feature automatically power off peripherals when the a master device,
usually a PC, hibernates or is shut down. Power to peripherals is immediately
restored when the master device wakes up or is switched on.
·
Transformer-block spaced outlets
Protect
equipment with input transformer blocks without blocking access to other
receptacles.
·
Cold-start capable
Provides
temporary battery power when the utility power is out.
·
Intelligent battery management
Maximizes
battery performance, life, and reliability through intelligent, precision
charging.
·
Battery failure notification
Provides
early-warning fault analysis on batteries enabling timely preventive
maintenance
Safety
·
Safety-agency approved
Ensures
the product has been tested and approved to work safely with the connected
service provider equipment and within the specified environment.
Manageability
·
Audible alarms
Provides
notification of changing utility power and UPS power conditions
·
Disconnected battery notification
Warns
when a battery is not available to provide backup power.
·
USB connection
Use your
PC to access additional power protection and management features for your UPS
via a USB Port.
·
LCD Status Display
Provides
key UPS status at a glance. Multiple status indicators with load and battery
bar graphs.
Output
·
Output power capacity
865Watts
/ 1.5 kVA
·
Max Configurable Power (Watts)
865Watts / 1.5 kVA
·
Nominal Output Voltage
230V
·
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
·
Load Crest Factor
3 : 1
·
Topology
Line Interactive
·
Waveform type
Stepped approximation to a sinewave
·
Output Connections
(5) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
(5) IEC 320 C13 (selector_surgetitle)
·
Transfer Time
10ms typical : 12ms maximum
Input
·
Nominal Input Voltage
230V
·
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
·
Input Connections
IEC-320 C14
·
Input voltage range for main operations
176 - 294V
·
Input voltage adjustable range for mains operation
156 - 300V
·
Number of Power Cords
1
Batteries
& Runtime
·
Battery type
Maintenance-free
sealed Lead-Acid battery with suspended electrolyte : leakproof
·
Typical recharge time
8hour(s)
·
Replacement Battery
·
Expected Battery Life (years)
3 - 5
·
RBC Quantity
1
·
Extended Run Options
·
Runtime
·
Efficiency
Communications
& Management
·
Interface Port(s)
Optional
Simple Signalling RS232 cable , USB
·
Control panel
Multi-function LCD status and control console
·
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload
continuous tone alarm
Surge Protection
and Filtering
·
Surge energy rating
441Joules
·
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-11 connector),
Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
·
Filtering
Full time multi-pole noise filtering :10% of IEEE surge
let-thgouh : zero clamping response time: instantaneous
Physical
·
Maximum Height
301mm
, 30.1CM
·
Maximum Width
112mm , 11.2CM
·
Maximum Depth
380mm , 38.0CM
·
Net Weight
12.7KG
·
Shipping weight
14.3KG
·
Shipping Height
387mm , 38.7CM
·
Shipping Width
238mm , 23.8CM
·
Shipping Depth
488mm , 48.8CM
·
Color
Black
·
Master Carton Units
1.0
·
Units per Pallet
20.0
·
SCC Codes
1073130426874 8
Environmental
·
Operating Temperature
0 - 40
°C
·
Operating Relative Humidity
0 - 95 %
·
Operating Elevation
0-9000meters
·
Storage Temperature
-15 - 45 °C
·
Storage Relative Humidity
0 - 95 %
·
Storage Elevation
0-15000meters
·
Audible noise at 1 meter from surface of unit
45.0dBA
Conformance
·
Approvals
A-tick,
C-tick, CE, ENERGY STAR V1.0 (EU), GOST, GS Mark, Telepermit, TUV
·
Equipment protection policy
Lifetime : 200000 AUD, Lifetime : 150000 Euros, Lifetime : 75000
GBP
·
Standard warranty
2 years repair or replace, 3 years repair or replace for
European Union countries
Sustainable
Offer Status
·
RoHS
Compliant
·
REACH
REACH: Contains No SVHCs
·
PEP
Available in Documentation tab
·
EOLI
Available in Documentation tab