AR2400FP1 Features

Key Features

Rack Height

42U

Rack Width

19"

NetShelter SV 42U 600mm Wide x 1060mm Deep Enclosure with Sides, Black, Single Rack Unassembled

Not all installation sites have space clearance required to move and install standard height enclosures. This unassembled Universal IT enclosure option for low to medium density server and networking applications is packaged for transport through narrow spaces and assembly at the installation site.

Includes: Adjustable vertical mounting rails, Baying hardware, Casters, Door handle, Doors, Installation guide, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting hardware, Pre-installed casters, Qty 2 - Plates, Qty 4 - Bolt-down brackets, Roof, Side Panel Lock, Side panels, Slam Latches

NetShelter SV Enclosures Features & Benefits

Convenience

Quick release doors with spring pin design

Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple spring hinge pin design.

Cable access openings and panels

Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Brushes included in roofs for 800mm (32 in) wide enclosures.

Simple Selection

No need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.

Perforated front and rear doors

Perforated front and rear doors provide ample ventilation for rack-mount equipment.

Removable full-height side panels

Side panels are removable for ease of access to the enclosure during equipment installation and setup. Side panels are lockable utilizing a single key that is also usable on the front and rear doors.

Enclosure adjustment tools and hardware provided

All enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.

Agility

Joining hardware provided

Enclosures include pre-installed joining hardware for joining enclosures in a row and provide additional stability to the enclosure. Enclosures are pre-installed with joining brackets for joining enclosures on 600-mm centers. Joining brackets for joining enclosures on 24-in centers are included with the provided hardware kit.

Unassembled enclosure option (42U x 600mmW x 1060mmD) for unique sites

Not all installation sites have space clearance required to move and install standard height enclosures. This unassembled option is packaged for transport through narrow spaces and assembly at the installation site.

Split rear doors

Split rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.

Standard-profile castors and adjustable leveling feet from underneath

Enclosures are shipped standard with both leveling feet and castors. Leveling feet can be adjusted using a wrench from underneath the enclosure.

Pre-installed rear accessory mounting brackets

Integrated and adjustable rear accessory mounting brackets provide zero U mounting locations for toolless accessories. Each bracket has two mounting bays to support a combination of up to four accessories such as Rack PDUs and vertical cable organizers mounted inside the rack. Adjust the brackets from their standard factory positions or install additional brackets (AR824002 - Qty 2) to install half enclosure height accessories such as cable managers and vertical Rack PDUs.

Adjustable mounting rails with simple alignment

The vertical mounting rails can be adjusted in 0.4 in (10 mm) increments covering virtually any mounting requirement for IT equipment. Align the mounting rails with the opposite side of the enclosure by identifying the hole position used. U positions are numbered front and back for rapid installation of equipment.

Safety

Enclosure to floor bolt-down brackets provided

Enclosure is delivered with bolt-down brackets that secure the enclosure to the pallet during shipment. These same bolt-down brackets can be utilized to bolt the enclosure to the floor at the final installation site.

Integrated electrical grounding

The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.

Compatibility

Vendor-neutral EIA-310 19in Rack Mounting Compatibility Guaranteed

Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The "Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter.

Schneider Electric Rack Systems Compatible

Compatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.

Physical

Maximum Height

80.98inches (2057MM, 205.7CM)

Maximum Width

23.62inches (600MM, 60.0CM)

Maximum Depth

41.73inches (1060MM, 106.0CM)

Net Weight

246.84lbs. (112.2KG)

Shipping weight

486.46lbs. (221.12KG)

Shipping Height

31.89inches (810MM, 81.0CM)

Shipping Width

26.89inches (683MM, 68.3CM)

Shipping Depth

87.8inches (2230MM, 223.0CM)

Color

Black

Maximum Mounting Depth

30.6inches (777.0MM, 77.72CM)

Minimum Mounting Depth

6.6inches (168.0MM, 16.76CM)

Front Door

16.0gauge

Vertical Posts

18.0gauge

Rear Door

16.0gauge

Roof

19.0gauge

Side Panels

18.0gauge

Weight Capacity (static load)

2205.0lbs. (1002.27KG)

Weight Capacity (dynamic load)

1014.0lbs. (460.91KG)

Environmental

Protection Class

IP 20