Votes with an average with
Availability:
In stock
Out of stock

Product Description

APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable | SUVTP30KH3B4S
SUVTP30KH3B4S
APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
·         Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
·         Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Smart-UPS VTFeatures & Benefits
Sustainability
·         EU CoC for UPS
Ensures that UPSs sold in the EU are highly efficient
Marketing Features
·         Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
·         Network manageable
Provides remote power management of the UPS over the network.
·         Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
·         Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
·         Scalable runtime
Allows additional run time to be quickly added as needed.
·         Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Total Cost of Ownership
·         Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
·         Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
·         Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
·         Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Protection
·         Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
·         Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
·         Cold-start capable
Provides temporary battery power when the utility power is out.
Serviceability
·         Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
·         Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
·         Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
·         Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Manageability
·         Network manageable
Provides remote power management of the UPS over the network.
·         SmartSlot
Customize UPS capabilities with management cards.
·         LED status indicators
Quickly understand unit and power status with visual indicators.
·         Programmable frequency
Ensures compatibility with different input frequencies.
·         Audible alarms
Provides notification of changing utility power and UPS power conditions
·         LCD display
Alpha-Numeric Display which displays system parameters and alarms.
·         InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Availability
·         Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
·         Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
·         Battery modules connected in parallel
Delivers higher availability through redundant batteries.
·         Scalable runtime
Allows additional run time to be quickly added as needed.
·         Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Output
·         Output power capacity
24.0 KWatts / 30.0 kVA
·         Max Configurable Power (Watts)
24.0 KWatts / 30.0 kVA
·         Nominal Output Voltage
400V 3PH
·         Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
·         Efficiency at Full Load
96.4 %
·         Output Voltage Distortion
Less than 5% at full load
·         Output Frequency (sync to mains)
47 - 53 Hz for 50 Hz nominal
·         Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
·         Other Output Voltages
380, 415
·         Load Crest Factor
3 : 1
·         Topology
Double Conversion Online
·         Waveform type
Sine wave
·         Maximum Output Current
48
·         Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
·         Nominal Input Voltage
400V 3PH
·         Input frequency
40 - 70 Hz (auto sensing)
·         Input Connections
Hard Wire 5-wire (3PH + N + G)
·         Input voltage range for main operations
304 - 477V
·         Efficiency at Full Load
96.4 %
·         Other Input Voltages
380, 415
·         Maximum Input Current
41.0A
·         Input Power Factor at Full Load
0.98
Batteries & Runtime
·         Battery type
VRLA
·         Included Battery Modules
3
·         Typical recharge time
5hour(s)
·         Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
·         Battery Slots Empty
1
·         Expected Battery Life (years)
3 - 5
·         RBC Quantity
3
·         Extendable Run Time
1
·         Extended Run Options
APC-Smart-UPS-VT-30kVA-400V-w-3-Batt-Mod-Exp-to-4-Start-Up-5X8-Int-Maint-Bypass-Parallel-Capable
·         End of Discharge Battery Voltage
+/-154 V
·         Runtime
View Runtime Graph
View Runtime Chart
Communications & Management
·         Interface Port(s)
DB-9 RS-232 , Smart-Slot
·         Pre-Installed SmartSlot™ Cards
AP9631
·         Control panel
Multi-function LCD status and control console
·         Audible Alarm
Audible and visible alarms prioritized by severity
·         Emergency Power Off (EPO)
Yes
Physical
·         Maximum Height
1490mm , 149.0CM
·         Maximum Width
523mm , 52.3CM
·         Maximum Depth
842mm , 84.2CM
·         Net Weight
536.82KG
·         Shipping weight
568.18KG
·         Shipping Height
1643mm , 164.3CM
·         Shipping Width
650mm , 65.0CM
·         Shipping Depth
1062mm , 106.2CM
·         Color
Black
·         Units per Pallet
1.0
Environmental
·         Operating Temperature
0 - 40 °C
·         Operating Relative Humidity
0 - 95 %
·         Operating Elevation
0-999.9meters
·         Storage Temperature
-50 - 40 °C
·         Storage Relative Humidity
0 - 95 %
·         Storage Elevation
0-15000meters
·         Audible noise at 1 meter from surface of unit
55.0dBA
·         Online thermal dissipation
3685.0BTU/hr
·         Protection Class
IP 20