APC Smart-UPS RT 20kVA RM 230V

·        

Dual mains input

Increases
availability by allowing the UPS to be connected to two separate power sources.

·        

LCD display

Alpha-Numeric
Display which displays system parameters and alarms.

·        

Manageable external batteries

Reduces
preventative maintenance service needs by monitoring the health and status of
the external batteries and their expected runtime.

·        

Rack/Tower convertible

Protects the
initial investment in the UPS when migrating from tower to rack-mount
environment.

·        

Removable input/output wiring tray

Allows quick
and easy installation and maintenance of the UPS.

·        

Single or three-phase input wireable

Provides
flexibility for the UPS to be installed using either single or three-phase
input wiring.

Availability

·        

Automatic internal bypass

Supplies
utility power to the connected loads in the event of a UPS power overload or
fault.

·        

Intelligent battery management

Maximizes
battery performance, life, and reliability through intelligent, precision
charging.

·        

Scalable runtime

Allows
additional run time to be quickly added as needed.

·        

Automatic restart of loads after UPS shutdown

Automatically
starts up the connected equipment upon the return of utility power.

·        

Hot-swappable batteries

Ensures clean,
uninterrupted power to protected equipment while batteries are being replaced

·        

Temperature-compensated battery charging

Prolongs
battery life by regulating the charge voltage according to battery temperature.

Manageability

·        

Serial connectivity

Provides
management of the UPS via a serial port.

·        

LED status indicators

Quickly
understand unit and power status with visual indicators.

·        

Network manageable

Provides
remote power management of the UPS over the network.

·        

SmartSlot

Customize UPS
capabilities with management cards.

·        

InfraStruXure Manager Compatible

Enables
centralized management via the APC InfraStruXure Manager.

Adaptability

·        

Rack/Tower convertible

Protects the
initial investment in the UPS when migrating from tower to rack-mount
environment.

·        

Flash upgradeable firmware

Install
maintenance releases of firmware remotely using FTP.

·        

Plug-and-Play external batteries

Ensures clean,
uninterrupted power to the loads when adding extra runtime to the UPS.

Serviceability

·        

User-replaceable batteries

Increases
availability by allowing a trained user to perform upgrades and replacements of
the batteries reducing Mean Time to Repair (MTTR)

·        

Automatic self-test

Periodic
battery self-test ensures early detection of a battery that needs to be
replaced.

·        

Predicitive failure notification

Provides
early-warning fault analysis ensuring proactive component replacement.

·        

Disconnected battery notification

Warns when a
battery is not available to provide backup power.

·        

Audible alarms

Provides
notification of changing utility power and UPS power conditions

Protection

·        

Safety-agency approved

Ensures the
product has been tested and approved to work safely with the connected service
provider equipment and within the specified environment.

·        

Cold-start capable

Provides
temporary battery power when the utility power is out.

·        

Resettable circuit breaker

Easy recovery
from overloads; no need to replace a fuse.

·        

Frequency and voltage regulation

Gives higher
application availability by correcting poor frequency and voltage conditions
without using the battery.

·        

Power conditioning

Protects
connected loads from surges, spikes, lightning, and other power disturbances.

·        

Generator compatible

Ensures clean,
uninterrupted power to protected equipment when generator power is used.

·        

Input power factor correction

Minimizes
installation costs by enabling the use of smaller generators and cabling.

·        

Output power capacity

16.0 KWatts
/ 20.0 kVA

·        

Nominal Input Voltage

230V , 400V
3PH

·        

Battery type

Maintenance-free
sealed Lead-Acid battery with suspended electrolyte : leakproof

·        

Interface Port(s)

DB-9 RS-232
, RJ-45 10/100 Base-T , Smart-Slot

·        

Filtering

Full time
multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping
response time : meets UL 1449

·        

Maximum Height

533mm
, 53.3CM

·        

Operating Temperature

0 - 40 °C

·        

Approvals

BSMI, EN/IEC
62040-2, EN/IEC 62040-1-1, VDE

·        

RoHS

Compliant