Daikin Central Air Conditioner (Indoor Unit) Duct | FXMQ200MF

Features

 • 100% fresh air intake possible 

 • Ideal solution for shops, restaurants or offices requiring maximum floor space for furniture, decorations and fittings 

• Operation range: -5ºC to 43ºC

• Up to 225Pa external static pressure allows extensive ductwork runs and flexible application: ideal for use in large areas 

• Drain pump kit available as accessory

SPECIFICATION

DIMENSION:470x1380x1100mm(HEIGHTxWIDTHxDEPTH)

Weight:123Kg

Fan type:Sirocco Fan

Air filter:optional/cf.note

Fan motor model:D13/4G2DA1

Refrigerant:Electronic expansion valve

Voltage:220-240v

Notes (1)

 Cooling: outdoor temp.: 33ºCDB, 28ºCWB (68%RH), discharge set temperature: 18ºCDB, equivalent piping length 7.5m (horizontal)

 (2) Heating: outdoor temp. 0ºCDB, -2.9ºCWB (50%RH); discharge set temp. 25ºCDB; equivalent piping length: 7.5m (horizontal) 

(3) Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat. 

(4) The air filter is not a standard accessory, but please mount it in the duct system of the suction side. Select its colorimetric method (gravity method) 50% or more. 

(5) When connected to VRV® water-cooled outdoor units a mix of ventilation units and VRV® indoor units is not possible 

(6) Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits. 

(7) Maximum allowable voltage range variation between phases is 2%. 

(8) MCA/MFA: MCA = 1.25 x FLA

 (9) MFA ≤ 4 x FLA

 (10) Next lower standard fuse rating minimum 15A

 (11) Select wire size based on the value of MCA 

(12) Instead of a fuse, use a circuit breaker 

(13) 45% Relative humidity